ELECTRIC ROLLERDOOR – J BRACKETS
Installation
-
11
-
ENG
5.
Roll the screen material fully onto the top tube, we recommend the fabric rolls off
the back of the top tube to minimise the gap between the fabric and building face.
Tie the tubes together as shown in Figure 6.
Figure 6, Roll Up Door Around Top Tube and Secure
6.
Insert motor assembly into drive end of top tube, and then attach the drive end
wall bracket to the motor using the R-clip supplied, as shown in Figure 7.
Figure 7, Motor Inserted Into Top Tube and Drive Bracket Attached
Rope to tie tubes together
i) Slide motor (O1) into top
tube
ii) Attach drive bracket (F1)
R-Clip
