ELECTRIC ROLLERDOOR – J BRACKETS
Installation
-
9
-
ENG
Figure 4b, Minimum Cutting Lengths of Tubes and Fabric
4.
Push the Flute Guide Insert over the end of the flute in the tube to protect the
fabric sheet as it is being fitted. When the fabric is inserted remove the Flute
Guide Insert form the end of the flute.
Slide the screen material (B1) into the flutes of the top and bottom tubes. Cut to
suit and slide nylon insert (J1) into the pocket of the flap (C1). Slide flap into
bottom flute and secure each end with insert lockers (K1), Figure 5a.
Drive End
Free End
Please note when
using the minimum
dimensions there
will be a 5mm gap
between the fabric
and the opening
on each side of the
door
