38
Step One - Installation Process
There is no need to drain or change the water in your spa pool unless you were previously
using bromine.
+
Place the simplesilver™ tablet anywhere in your spa pool water.
Dosage.
One 500g tablet is standard for spa pools with a volume of up to 1500L.
For larger spa pools or swim spas, you will need to use a larger volume tablet:
Spas
Spa Volume
Dose
Venus
590L
1 x 500g Tablet
Aquila II
1080L
1 x 500g Tablet
Orion
1350L
1 x 500g Tablet
Hydra
1480L
1 x 500g Tablet
Step Two - Filter Pump Set Up
4. You need to set your filter pump timer to operate daily.
+
Turn the filter pump onto the standard mode.
+
Turn off the sleep timer.
+
Turn off holiday mode.
+
Turn off energy-saving mode.
+
Make sure to open all jet heads and water features.
The filter circulation pump must be set up correctly to ensure 80,000 to 100,000 litres of
water circulate daily. This ensures an accurate quantity of simplesilver™ minerals are eluted
into the water to balance and control it.
5. Once the filter pump has been set, do not use your spa pool for the next seven days.
+
Removing contamination and dispensing the correct levels of simplesilver™ minerals
will take about a week, after which you will have crystal clear, clean, odour-free water for
the next year!
6. At the end of the seven day period:
+
Clean the filters with a cartridge cleaning solution, as water alone is ineffective.
+
Dry these before reinstalling. This will make the filters more effective as the fibers
expand, stopping the water from foaming.
What is going on in my spa pool over this seven day period?
+
As the filter pump circulates the water over the simplesilver™ tablet, the minerals are
distributed into the spa pool at a constant and controlled rate.
+
It takes time for the correct concentration of simplesilver™ minerals to be dispensed into
the water to effectively control and balance the pH, alkalinity, total dissolved solids, scale,
corrosion and bacteria.
+
During the first week, any existing contaminants within the spa pool are precipitated
out into the water and it might turn grey. Do not panic, this is simplesilver™ doing its
job. These contaminants are removed via the filters, which are cleaned by you after
seven days.
