18
Hard Cover Installation
1.
Position the spa cover on the spa, ensuring that the spa skirt is smooth and not folded in
any location.
2.
Pull the spa strap tightly downward, then press the buckle against the spa cabinet.
3.
Whilst holding the buckle against the cabinet, release the top strap from the buckle by
pressing the sides and unclipping. Mark the three mounting locations where you will screw
the base of the buckle onto the cabinet.
4.
Use the supplied screws to secure the base of the buckle onto the cabinet.
5.
Repeat steps two-four for the remaining straps.
6.
You should now be able to tightly and safely secure your spa cover to the cabinet.
Cover Care
+
Avoid exposing the cover to excessive chemicals. Always remove the cover when adding your
spa chemicals. Any texture change or extreme discolouration of the base material indicates a
chemical burn.
+
Use a mild detergent and water solution to clean the vinyl portion monthly. Keep the cover
clean and free of dirt and debris to avoid colour leaching.
+
Avoid water and snow from accumulating. These can cause the cover to sag and become
water-logged, which will deteriorate the cover.
+
Avoid scraping the cover on rough surfaces. Avoid jerking or pulling the cover, especially
when vinyl is soft from heat, to prevent threads from tearing the vinyl.
+
Always unfasten all hardware before opening the cover. Gently fold down the cover onto itself.
+
Do not sit, walk, or lay on the spa cover. Avoid placing any heavy objects on the cover.
