3. Getting Started
3.1 Setup and Common Settings
To set up the unit:
1. Place the unit on a suitable shelf or table
2. Connect the power adaptor between the unit and the mains supply.
3. Attach the WiFi antenna
4. To receive broadcast radio (DAB and FM), attach the wire antenna.
The setup wizard will now start.
Setup Wizard
WELCOME
When the unit is started for the first time, it runs through a setup wizard to configure settings for date/time
and network. Once this has finished, the system is ready to use in most modes.
Note:
To change these settings later, select Menu >
System settings
>. To run the setup wizard again,
select Menu >
System settings
>
Setup wizard
.
Select
Yes
to start the setup wizard.
If you choose
No
, the next screen asks if you would like to run the wizard next time the unit is started.
The system then starts without configuring time/date and network settings and enters the Main Menu.
Note:
If power is removed while the wizard is in progress, the wizard will run again next time when the
unit is started.
12/24 Hour Display
To change between 12 and 24 hour display, select
Set 12/24 hour
and then select your preference.
Time/Date
The time and date can be updated manually or automatically. With auto-update, the time and date are
automatically synchronized with external clocks. Auto-update is generally more accurate.
9
Getting Started
Getting Started
