GALA MIG 3000/3800.
18
Power Supply hose (RVK-1KV).
GALA MIG
3000
GALA MIG
3800
Length
230 V
400 V
230 V 400 V
10 m
2.5 mm
2
2.5
mm
2
4
mm
2
4
mm
2
15-20 m
4 mm
2
4
mm
2
6
mm
2
4
mm
2
Voltage change system of GALA MIG 3000/3800 equipment.
When the equipment leaves the factory it is tagged with the voltage of use that has been selected internally
(normally 400V). In dual-voltage three-phase equipment the voltage can be changed by accessing the inside
of the equipment. Remove the side panel and on the inside you will find a coupler plug. Make the machine
connection as shown in the Figure.
STANDARD EQUIPMENT (230/400 V)
SPECIAL EQUIPMENT (220/440 V)
DO NOT FORGET TO FIT THE EARTH CONNECTION INTO THE PLUG.
MAKE SURE THE MAINS VOLTAGE COINCIDES WITH
THAT ESTABLISHED IN THE MACHINE.
230 V
400 V
220 V
440 V
CARRY OUT THE VOLTAGE CHANGE OPERATION WITH THE MACHINE
DISCONNECTED FROM MAINS.
