GainSpan GS2200M, Руководство пользователя по оборудованию

Страница: 29 / 48

GS2200M Starter Kit Board Hardware User Guide Setting Up the Starter Kit Board
Preparing for Starter Kit Board Setup
GS2K-SKB-HW-UG-001278, Release 1.0 29
2.1.4 Unpacking and Inspecting the GS2200 Based Starter Kit Board
This section describes how to remove the SKB from its shipping box, and determine that
you received all of the required equipment.
The unpacking process is described in the following steps:
1. Remove the packing slip from the shipping box. Use this paper work to validate the
contents.
2. Prepare to remove the board from the shipping box.
• Remove cabling from the box and set it aside
• Remove any documentation from the box and set it aside
3. Carefully lift the board from the shipping container.
4. Remove the protective ESD bag from the evaluation board.
5. Set all protective packaging aside for later use.
6. Inspect the contents for damage.
If damaged, contact your GainSpan distributor to file a RMA (see Returning Products to
GainSpan, page 18 ).