P
UB
42004-438A
300
S
ERIES
E
MERGENCY
T
ELEPHONE
M
ANUAL
P
AGE
37 of 44
f:\standard ioms - current release\42004 instr. manuals\42004-438a.doc
02/11
Open Gate Command Setup
The command (DTMF key sequence) that triggers the timed activation of Output 4 contact closure (TB5)
is configurable. The sequence can contain up to eight DTMF digits in the 0–9 range. The first digit must
not be 0 (zero). Some examples of valid “open gate” command sequences are: 87654321; 832; and even
a single digit such as 7. The duration of the activation (closure) of Output 4 can be set in the range of 0.1
to 12.7 seconds in 0.1-second increments.
Feature
Key
Sequence
Description
Default
“Open Gate”
Command
Sequence
N N..* 8
Assigns the digits NN.. as the command key sequence that
triggers the timed activation of Output 4. NN is a sequence
of 1–8 digits, with the first digit not zero. To assign “726”
as the “Open Gate” command, enter
7
2
6
*
8
.
90125
Duration of
Timed
Activation
# 2 6 N N N
Sets the duration of the activation of the Output 4 contact
when triggered by the “Open Gate” command. Use entries
001–127, representing 0.1 second to 12.7 seconds in
0.1-second increments.
Use 000 to disable this feature.
To set a duration of 7 seconds, enter
#
2
6
0
7
0
.
5 seconds
Voice Triggering Option (Call Received When Lit LED)
Each telephone is factory-programmed for illumination of the
C
ALL
R
ECEIVED
W
HEN
L
IT
LED to occur
when the DTMF * is received from the called party. If Voice Triggering is enabled, the LED will
illuminate upon receipt of a called party note voice response, eliminating the need for the called party to
transmit a DTMF *. Note that the ANI code will only be generated when the DTMF * is transmitted
(default). It will not be generated when the Voice Triggering option activates the LED.
Feature
Key
Sequence
Description
Default
Voice
Triggering
Option Enable
# 7 0 1
Provides CRL LED illumination via voice detection.
Yes
Voice
Triggering
Option Disable
# 7 0 0
Returns telephone to default operation of CRL LED
(DTMF *).
No
