Gaggia SYNCRONY COMPACT, Руководство по эксплуатации

Страница: 27 / 40

ENGLISH
• 27 •
4 INSTALLING THE COFFEE MAKER
For your safety and the safety of third parties,
follow the “Safety Standards” (see chapter 3).
4.1 Packaging
The original packaging was designed and
made to protect the appliance during ship-
ment.
We recommend you keep it for future needs.
4.2 Preliminaries
• Remove the coffee maker from the packag-
ing and position it in a suitable location
that meets the requirements specified
and described in the safety standards
(chap.3).
• Open the machine door, take the drip tray
(12) from the package, and fi t the dregs box
(10); then, fi t the drip tray in the machine
(Fig.21).
• Make sure that the drip tray and plate
(Fig.01, pos. 12), the coffee grounds
drawer (10) and the coffee dispenser (17)
are fi tted correctly and that the front cover
(15) is closed.
• Keep the cleaning brush (20) and the
ground coffee measuring spoon (19) to
hand.
If the red light (21) is still on when the
machine is started, it means that one of the
parts described above is positioned incor-
rectly.
Caution: You must read chapter 15. This
chapter explains in detail the meaning
of all the visual signals displayed to the user
through the lights (LEDs) found on the control
panel.
4.3 Preparing the coffee maker for use
• Open the water tank cover (Fig.02) and
remove the tank (Fig.03). Rinse and fi ll with
fresh potable water (Fig.04); we recom-
mend that you do not exceed the “MAX”
level mark. Replace the water tank in its
housing and reposition the cover on top.
Always fi ll the tank (9) with fresh still
water. Hot water and other liquids can
damage the tank and/or the appliance. Do
not operate the appliance without water: make
sure that there is enough water inside the
tank.
• Lift the cover (Fig.05) and fi ll the container
with coffee beans (Fig.06).
Use coffee beans only. Ground and
instant coffee, as well as other items,
cause damage to the appliance.
• Close the cover of the coffee bean container
(1).
• Insert the plug into the outlet at the back of
the coffee maker (Fig.07) after making sure
that the ON/OFF switch (7) is in the “O”
position.
• Insert the other end of the plug into a suitable
wall outlet.
• When not in use, the ON/OFF switch of
the appliance is in the “O” position. To
switch ON the coffee maker, simply press
the switch (Fig.08). The LEDs (23) and (24)
start fl ashing on the control panel.
• To fi ll the circuit, direct the steam/hot water
nozzle (Fig.01, item 14) towards the drip
tray, place a cup or suitable vessel under
the steam nozzle and turn the knob anti-
clockwise (Fig.09). Wait for water to fl ow
regularly from the nozzle and, then, shut off
the fl ow by turning the knob clockwise.
Note: You must fi ll the circuit of the
appliance if the machine is switched
ON for the fi rst time, the machine has not been
used for a long time, the water tank has been
emptied completely or the warning light (27)
fl ashes.
• After switching ON the appliance, LEDs
(23) and (24) fl ash simultaneously during
the heating phase. Once the heating phase
is fi nished, LEDs (23) and (24) emit a fi xed
light.
• At this point, your coffee maker is ready for
use.