Gaggenau WM262700, Инструкция по использованию и уходу / Руководство по установке

Страница: 20 / 56

20
en-us
Installation instructions
Types of drainage hookups
Standpipe
Attach the drain hose to the elbow included with your
washer.
Position the elbow on the drain hose 4" from end of hose
as shown. Insert this section of the drain hose into the
drain pipe. Secure the elbow and hose with a nylon tie
strap or the equivalent to keep the hose from coming out
of the drain pipe during use.
Sink siphon
Secure the drain hose to the sink siphon using a Ø 0.9 -
1.6 in. (20-44 mm) hose clip (available from a hardware
store).
Wash Basin
9
WARNING
Scalding!
When washing at high temperatures, there is a risk
of scalding if you touch hot suds, e.g. when
pumping out hot suds into a wash basin.
Do not reach into the hot suds.
NOTICE
Appliance damage/damage to textiles
If the end of the drain hose touches the discharge water
(water drained from washer) it (the discharge water) can
be sucked back into the appliance and may damage the
appliance or textiles.
Make sure that:
– There is no stopper in the sink drain.
– The end of the hose does not touch the discharge
water.
– The sink drain is free flowing and not partially
clogged.
Attach the drain hose securely to the wash basin.
NOTICE
In any multi-story installation, the washer should be
installed on a drained floor to prevent water damage to
rooms below in the event of a leak.
LQ
FDEOHWLH
GUDLQ
SLSH