Gaggenau RC 462 AU, Инструкция по установке

Страница: 32 / 40

32
22. Hanging and aligning the furniture door
The height of the cabinet frontage is set using the threaded
rods.
z
Hang the furniture door on the threaded rods.
z
Adjust the furniture door using the threaded rods
(Torx screwdriver).
z
Transfer the middle drilled holes on the outside
edge of the appliance door to the furniture door
and mark them.
z
Remove furniture door.
z
On both lengths of the furniture door, draw a parallel
line with the help of the positioning aid.
z
Lengthen the drill hole markings to the parallel lines
using a try square.
z
Position fixing rail and mark holes.
z
Pre-drill the holes.
z
Screw on the fixing ribs.