Gaggenau RC 462 AU, Инструкция по установке

Страница: 28 / 40

28
17. Fastening the plinth strip
m
Caution!
From the floor upwards, the maximum height of the
base strip is 10.1 cm. Never cover the ventilation slits
with the base panel. Risk of damage to the appliance.
z
Where necessary, cut the base strip to the required
length.
z
Attach base panel to the appliance.
z
Take the protective film off from the adhesive pads
on the Velcro strip.
z
Put the base strip onto the base panelling and
push firmly.
z
Measure the difference in depth Y between the base
panelling and the base strip of the adjacent lower
cabinets.
z
Remove the base panelling again.
z
Loosen the fastening joint of the base panelling.
z
Take out/slide in the joint around the measured
depth
Y .
z
Screw the joint again tightly.