Automatic switch-off
en
25
21 Automatic switch-off
If you operate a cooking zone for an extended period
and do not change any settings, the automatic switch-
off is activated. Depending on which power level has
been selected, the cooking zone switches off automat-
ically after 1 to 10 hours.
The cooking zone stops heating. A signal tone sounds
and the residual heat indicator or appears in the
display for the cooking zone.
You can select the cooking zone again at any time and
reset it.
22 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
22.1 Overview of the basic settings
Here you can find an overview of the basic settings
and the factory preset values.
Display
Selection
Audible signals
All signal tones are switched on.
1
Only the fault signal is switched on.
Time for selecting the cooking zone
The cooking zone stays selected for
5 seconds.
The cooking zone stays selected for
10 seconds.
1
The cooking zone stays selected for
15 seconds.
Unlimited: The cooking zone that was
last set remains selected.
Power limitation. Limit the total power of
the hob. The available settings depend on
the maximum power of the hob.
Deactivated. Maximum power of the
hob.
1, 2
1000 W minimum power.
. 1500 W
...
3000 W recommended for 13 A.
. 3500 W recommended for 16 A.
4000 W
. 4500 W recommended for 20 A.
...
or . Maximum power of the hob.
2
Restore factory settings
Individual settings retained.
1
Restore factory settings.
Cooking sensor function
3
Connect the wireless temperature sensor
to the hob.
Set according to height above sea level:
- Decrease.
Basic setting.
- Increase.
1
Factory setting
2
The cooktop's maximum power is shown on the rat-
ing label.
3
The function is not available in this model.
Display
Selection
Professional cooking function
Select individual cooking zone to preset
the heat setting for the professional cook-
ing function.
Preset values
1
:
Left flexible zone: .
Top right cooking zone: .
Bottom right cooking zone: .
Check cookware; cooking results
Not suitable.
Not perfect.
Suitable.
Set air recirculation mode or air extraction
mode
Air recirculation mode is set.
1
Air extraction mode is set.
Setting automatic start
Switched on.
1
The ventilation system
starts at the fan setting selected by the
sensor.
/ / Switched on. The ventilation system
starts at fan setting , or .
Switched off.
Set the sensor sensitivity for the ventilation
Lowest sensor sensitivity setting.
Medium sensor sensitivity setting.
1
Highest sensor sensitivity setting.
Set the automatic function with sensor-con-
trolled run-on
Switched off.
Switched on.
1
Home Connect
→
"Overview of the Home Connect set-
1
Factory setting
2
The cooktop's maximum power is shown on the rat-
ing label.
3
The function is not available in this model.
22.2 Opening the basic settings menu
Requirement:
The hob is switched off.
1.
Switch on the hob.
2.
Press within the next 10 seconds.
‒
To see the individual displays, turn the twist
knob.
The first four displays show the product information.
Содержание CV2821.1
Страница 1: ...en Information for Use CV2821 1 FlexInduction hob with integrated ventilation system Gaggenau ...
Страница 2: ...2 A B 1 1 2 200 W 3 700 W 3 300 W 3 700 W 1 IEC 60335 2 6 ...
Страница 38: ......
Страница 39: ......