Gaggenau CV2821.1, Инструкция по применению

Страница: 14 / 40

en
Basic operation
14
Switching off the ventilation system
1.
Press ​⁠.
2.
Use the twist knob to select the power level ​⁠.
3.
To switch to the settings area for the hob, press ​⁠.
10.3 Intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode. In intensive mode, the ventila-
tion system works at maximum performance for a short
time. It automatically switches back to a low setting
after a short time.
Switching on intensive mode
1.
Press ​⁠.
2.
Turn the twist knob until ​⁠ is displayed.
a
Intensive mode is now activated.
a After 6 minutes, the appliance automatically
switches back to power level ​⁠.
Switching off intensive mode
1.
Press ​⁠.
2. Turn the twist knob until the power level ​⁠ is dis-
played.
3. To switch to the settings area for the hob, press ​⁠.
10.4 Automatic start
When you start the appliance automatically, you can
specify in the basic settings whether, and at which
power level, the appliance switches the ventilation sys-
tem on as soon as you select a heat setting for a cook-
ing zone.
In the Basic settings →
Page 25 , you can set the fol-
lowing options when a heat setting for a cooking zone
is selected:
¡
The ventilation system does not start.
¡
The ventilation system starts at the power level se-
lected by the sensor.
¡
The ventilation system starts at a specified power
level.
You can also adjust the sensor sensitivity in the basic
settings.
10.5 Automatic mode with sensor control
In automatic mode, a sensor in the appliance detects
the intensity of the cooking odours and roasting
odours. The optimal fan speed is automatically
switched on depending on the sensor sensitivity set-
ting. If the sensor control reacts too weakly or too
strongly, you can change the setting for the sensor
sensitivity.
Switching on automatic mode with sensor
control
1.
Press ​⁠.
a The ventilation system starts at power level ​⁠.
2.
Turn the twist knob to the right until ​⁠ is displayed.
3. Press ​⁠.
a
The optimum power level is set automatically using
a sensor.
Switching off automatic mode with sensor
control
1.
Press ​⁠.
2.
Use the twist knob to select another power level or
turn the twist knob until ​⁠ is displayed.
a
The power level that is selected is shown on the dis-
play panel.
a
Automatic mode with sensor control is switched off.
10.6 Fan run-on
The fan run-on only starts if at least one cooking zone
has been switched on for at least one minute. After you
switch off the cooking zone, the ventilation system con-
tinues to run for a few minutes in order to remove any
cooking vapours. The ventilation system then switches
off automatically.
If the automatic function is activated with sensor-con-
trolled run-on in the basic settings, the fan run-on
switches on automatically after the appliance is
switched off.
When you switch off the appliance or all cooking
zones, ​⁠ and ​⁠ light up white. The fan run-on is
switched on.
The appliance switches off the fan run-on when you
switch on the appliance and switch a cooking zone
back on.
Switching off the fan run-on
1.
Press ​⁠.
a ​⁠ lights up orange.
2.
Use the twist knob to select the power level ​⁠.
3.
Press ​⁠.
a
The fan run-on is switched off.
10.7 Intermittent ventilation
With intermittent ventilation, the ventilation system
switches on automatically for 6 minutes every hour.
Switching on intermittent ventilation
1.
Press ​⁠.
2.
Turn the twist knob until ​⁠ is displayed.
3.
Press ​⁠.
a
The intermittent function is activated.
Note:
After the appliance has been switched off, the ​⁠
and ​⁠ symbols light up white.
Switching off intermittent ventilation
1.
Press ​⁠.
2.
Turn the twist knob until ​⁠ lights up
3.
To switch to the settings area for the hob, press ​⁠.
a
Intermittent ventilation is switched off.
10.8 Cooking instructions
This is where you can find an overview of useful cook-
ing instructions for dishes or for using cookware.
¡
When heating up puree, cream soups or thick
sauces, stir occasionally.
¡
To preheat, set heat setting 8-9.
¡
When cooking with the lid on, reduce the power
level as soon as you see steam escaping. The
cooking result is not affected by the steam escap-
ing.
¡
After cooking, place a lid on the cookware until you
serve the dish.
¡
To cook with the pressure cooker, observe the man-
ufacturer's instructions.