51
Power manager
en
h
Power manager
Power manager
You can use the power manager to set the total power of
the hob.
The hob is preset at the factory. Its maximum
performance is specified on the rating plate. You can
use the power manager to change the value in
accordance with the requirements for the relevant
electrical installation.
In order not to exceed this set value, the hob
automatically distributes the power available between
the cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached,
¬
appears in the heat setting
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
hob is changed, see section
D
Cleaning
Cleaning
Suitable maintenance and cleaning products can be
purchased from the after-sales service or in our e-Shop.
Hob
Cleaning
Always clean the hob after cooking. This will prevent
food deposits from becoming burned on. Only clean the
hob after the residual heat indicator has gone out.
Clean the hob with a damp dish cloth and dry it with a
cloth or towel to prevent limescale build-up.
Only use cleaning agents that are suitable for this type
of hob. Observe the manufacturer's instructions on the
product packaging.
Never use:
▯
Undiluted washing-up liquid
▯
Cleaning agents designed for dishwashers
▯
Abrasive cleaners
▯
Harsh cleaning agents, such as oven spray and
limescale remover
▯
Scouring pads
▯
High-pressure cleaners or steam jet cleaners
Stubborn dirt is best removed with a glass scraper,
available from retailers. Observe the manufacturer's
instructions.
You can obtain a suitable glass scraper from customer
services or through our online shop.
Using a special sponge for cleaning glass-ceramic hobs
achieves a great cleaning result.
Note:
Do not use any cleaning agents while the hob is
still hot. This may mark the surface. Make sure that any
residue left by cleaning agents is removed.
Potential marks
Limescale and
water marks
Clean the hob as soon as it has cooled
down. You can use a cleaning agent suit-
able for glass-ceramic hobs.*
Sugar, rice starch
or plastic
Clean immediately. Use a glass scraper.
Caution: Risk of burns.*
* Then clean with a damp dish cloth and dry with a cloth or
towel.
Содержание CI 283
