9
Familiarising yourself with your appliance
en
Standby
The appliance switches to standby mode if no function
is set or the childproof lock is activated.
The brightness of the control panel is dimmed in
standby mode.
Notes
–
Different things can be displayed in standby mode.
The default setting is the GAGGENAU logo and the
time.
–
The brightness of the display depends on the
vertical viewing angle.
–
You can change the display and the brightness at
any time in the basic settings.
Activating the appliance
To exit standby mode, you can either
▯
Turn the function selector,
▯
Touch a control panel,
▯
Or open or close the door.
You can now set the desired function. You can read
about how to set functions in the respective chapters.
Notes
–
When "Standby screen = off" is selected in the
basic settings, you must turn the function selector
to exit standby mode.
–
The appliance returns to the standby screen if you
have not made any settings for a long time after
activation.
–
The appliance rinses automatically after every
cooking process. The appliance rinses
automatically before each cooking process if it has
not been operated for more than 100 hours.
–
When the door is open, the interior lighting
switches off after a short time.
Additional information
(
and
)
By touching the
(
symbol, you can call up additional
information. For example, information on the type of
heating set or on the current temperature of the cooking
compartment.
Note:
During continuous operation after heating up,
slight deviations in temperature are normal.
The
)
symbol appears for important information and
indicates that an action is required. Important
information on safety and operating status is also
occasionally displayed automatically. These messages
disappear automatically after a few seconds or must be
confirmed with
™
.
With Home Connect messages, the Home Connect
status additionally appears in the
)
. You will find more
information about this in the section entitled
.
Cooling fan
Your appliance has a cooling fan. The cooling fan
switches on when the appliance is in operation. The hot
air escapes above the door.
After removing your food from the appliance, keep the
door closed until the appliance has cooled down. The
appliance door must not be left half open as this may
damage adjacent kitchen units. The cooling fan
continues running for a certain period after the
appliance has stopped heating; afterwards, it switches
itself off automatically.
Caution!
Do not cover the ventilation slots. Otherwise, the
appliance may overheat.
Drying the cooking compartment
After operation with a steam function, the cooking
compartment is damp. The cooling fan and the fan
wheel on the back wall of the cooking compartment
continue to run for a while after the appliance is
switched off and then switch off automatically. This may
take up to 95 minutes. The appliance door must remain
closed while the cooking compartment is being dried.
