Gaggenau BS 451, Инструкция по эксплуатации

Страница: 31 / 44

31
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.
--------
Disruption Possible cause Solution
Appliance not working, no display Plug not inserted Connect the appliance to the electricity
mains
Power failure Check whether other kitchen appliances
are working
Fuse defective Check in the fuse box whether the fuse
for the appliance is in working order
Operating error Switch off the fuse for the appliance in
the fuse box and switch it on again after
about 60 seconds
Appliance cannot be started Appliance door is not quite closed Close appliance door
The appliance is not working and the
display does not respond.
0
appears
on the display
Childproof lock activated Deactivate the childproof lock (see sec-
tion entitled 'Childproof lock')
Appliance switches off on its own Safety shut-off: the appliance has not
been operated for longer than 12 hours Confirm the message with
™
, switch off
the appliance and set it again.
Appliance does not heat up,
°
appears
in the display
Appliance is in demo mode Deactivate the demo mode in the basic
settings
The appliance cannot be started, the
display shows an error message The water tank is empty Fill the water tank
No steam visible in the oven Steam above 100°C is invisible This is normal
A lot of steam escapes at the top of the
door Appliance is calibrating the boiling point
or is preheating or the heating mode has
been changed This is normal
The appliance has not yet been cali-
brated Calibrate the appliance
A lot of steam escapes at the side of the
door Door seal soiled or loose Clean the door seal and insert it in the
groove
There is a "pop" noise during cooking Cold/warm effect with frozen food,
caused by the steam This is normal
The appliance is not producing steam
properly Limescale has formed in the appliance Start the descaling programme
Error message "Exxx" If an error message is displayed, turn
the function selector to
0 ; if the display
goes out, there was a non-recurring
problem. If the error occurs repeatedly
or the display remains on, please con-
tact the after-sales service and inform
them of the error code.