11
Before using for the first time
In this section, you can find out what you must do before
using your appliance to prepare food for the first time.
Read the section entitled 'Important safety information'
beforehand.
The appliance must be fully installed and connected to
the mains.
After connection to the mains, the "Initial settings" menu
appears in the display. You can now make settings for
your new appliance.
▯
Language
▯
Time format
▯
Time
▯
Date format
▯
Date
▯
Temperature format
▯
Water hardness
Notes
‒
The "Initial settings" menu will appear only after the
appliance has been connected to a power supply
and switched on for the first time, or if the
appliance has not been connected to a power
supply for a number of days.
Once the appliance has been connected to a power
supply, the GAGGENAU logo will appear first for
approximately 30 seconds. The "Initial settings"
menu will then appear automatically.
‒
You can change the settings at any time (see
section entitled 'Basic settings').
Setting the language
The preset language appears in the display.
1
Turn the rotary selector to select the required
display language.
2
Confirm with
™
.
Note:
If the language is changed, the system restarts.
This takes a few seconds.
Setting the time format
The two possible formats 24h and AM/PM appear in the
display. The default is the 24h format.
1
Use the rotary selector to select the desired format.
2
Confirm with
™
.
Setting the clock
The time is shown in the display.
1
Set the desired time using the rotary selector.
2
Confirm with
™
.
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The default is the D.M.Y format.
1
Use the rotary selector to select the desired format.
2
Confirm with
™
.
'HXWVFK
6SUDFKH
7LPHIRUPDW
7LPH
'DWHIRUPDW
