23
Completing initial set-up
"Initial set-up complete" appears in the display.
Confirm with
™
.
The appliance enters the standby mode and the
standby display appears. The appliance is now ready
for operation.
Heating up the oven
Ensure that no packaging remnants have been left in
the cooking compartment.
To remove the new cooker smell, heat up the oven
when it is empty and closed. An hour with Convection
Broil
R
at 390°F (200°C) is ideal for this purpose.
For instructions on how to set this type of heating,
refer to the
Oven
section.
Cleaning accessories
Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
Activating the appliance
Standby
The appliance is in standby mode if no function is set
or the child lock is activated.
The brightness of the control panel is dimmed in
standby mode.
Notes
‒
There are various indicators for standby mode.
Pre-set is the GAGGENAU logo and the time. If
you would like to change the display, see the
section on
Basic settings
.
‒
The brightness of the display depends on the
vertical viewing angle. You can even out the
display using the "Brightness" setting in the basic
settings.
Activate appliance
In order to exit standby mode, you can either
▯
Set the function selector,
▯
Touch a control panel,
▯
or open or close the door.
Now you can set the desired function. Read the
appropriate chapters to learn how to set functions.
Notes
‒
If "Standby screen = off" is selected in the basic
setting, you must turn the function selector to exit
the standby mode.
‒
The standby display appears again if you have not
made any settings for a long while after activation.
‒
The cooking compartment lighting goes out after
a little while if the door is open.
,QLWLDOVHWXS
FRPSOHWH