30
Self-cleaning surface in the cooking compartment
The back wall of the oven is coated with self-cleaning
enamel. It cleans itself while the oven is in operation.
Sometimes, larger splashes of food may not disappear
until the oven has been operated several times.
Residue left by spices and similar ingredients can be
removed with a dry cloth or a soft brush.
Notes
‒
Never treat the self-cleaning surface with oven
cleaner. If oven cleaner is accidentally applied to
the interior back wall, remove it immediately with
a sponge and plenty of water.
‒
Never use abrasive cleaning agents. You will
scratch or destroy the highly porous coating.
‒
Never clean the self-cleaning surface with a
scouring pad.
‒
Light discolouration of the enamel does not affect
self-cleaning.
Cleaning the cooking compartment floor, ceiling and
side walls: Use a dishcloth and hot detergent solution
or a vinegar solution.
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
If the appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Contact the after-
sales service.
--------
Disruption
Possible cause
Solution
Appliance not working, no display
Plug not inserted
Connect the appliance to the electricity
mains
Power failure
Check whether other kitchen appliances
are working
Fuse defective
Check in the fuse box whether the fuse
for the appliance is in working order
Operating error
Switch off the fuse for the appliance in
the fuse box and switch it on again after
about 60 seconds
Appliance cannot be started
Appliance door is not quite closed
Close appliance door
The food takes longer than usual to heat
up
The microwave output setting is too low Select a higher power setting
A larger amount than usual has been
placed in the appliance
Double the amount = almost double the
time
The food was colder than usual
Stir or turn the food during cooking
Appliance does not work, display does
not respond.
0
appears in the display
Child lock activated
Deactivate the child lock (refer to
Child
lock
section)
Appliance does not heat up,
°
appears
in the display
Appliance is in demo mode
Deactivate the demo mode in the basic
settings
Error message "Exxx"
If an error message is displayed, turn
the function selector to
0
; if the display
goes out, there was a non-recurring
problem. If the error occurs repeatedly
or the display remains on, please con-
tact the after-sales service and inform
them of the error code.