16
Sequential operation
With sequential operation, you can set up to five
different types of heating and cooking times to run
one after the other.
Setting sequential operations
1
Select the required microwave output or oven
heating function using the function selector.
2
Touch the
h
symbol.
The sequential operation menu is displayed.
3
Set the cooking time, temperature or grill setting
using the rotary selector.
4
Use
C
to select the second phase.
5
Select the required microwave output or oven
heating function using the function selector. Set
the cooking time, temperature or grill setting
using the rotary selector.
Note:
You can set a stabilisation time between
two microwave outputs so that the temperature is
distributed evenly within the food. To do this,
touch the
6
symbol and set a time using the
rotary selector.
6
Use
C
to select the third phase.
7
Select the required microwave output or oven
heating function using the function selector. Set
the cooking time, temperature or grill setting
using the rotary selector.
8
Use
C
to select the
6
"Cooking time" function.
9
Set the required cooking time using the rotary
selector.
10
Press
™
to confirm.
The main menu for the sequential operation is
displayed. The settings for each phase are shown
in the display.
11
Press
I
to start.
The operation begins. The cooking time starts
counting down.
Once the cooking time has elapsed, the appliance
switches off. An audible signal sounds. The signal
stops early if you touch the
™
symbol, open the
appliance door, or set the function selector to
0
. The
sequential operation has finished.
Changing the settings of the current phase
:
Touch the
H
symbol. The operation stops. Touch the
h
symbol and change the settings. Use the
™
symbol to exit the menu. Press
I
to start.
Deleting the settings:
Touch the
'
symbol.
+RWDLU
