Gaggenau BM 484, Инструкция по эксплуатации

Страница: 13 / 44

13
Setting the microwave
1 Set the required microwave output setting using
the function selector.
2 Set the cooking time using the rotary selector.
3 Press
I
to start.
The operation begins. The cooking time starts
counting down.
An audible signal sounds once the cooking time has
elapsed. The signal stops early if you touch the
™
symbol, open the appliance door, or set the function
selector to
0 . The microwave operation has finished.
If you open the oven door during operation, the
microwave operation is paused. After closing the door,
touch the
I
symbol. The operation continues.
You can change the cooking time at any time using the
rotary selector.
You can change the output at any time using the
function selector. Press
I
to restart.
You can call up the elapsed cooking time using the
(
symbol. Touch the
™
symbol to return to the standard
display.
Pause:
The operation can be paused using the
H
symbol. Use
the
I
symbol to continue.
Switching off:
To stop the operation and cancel the settings, turn the
function selector to
0 .
Note: It is normal for the fan to continue operating
even when the door is open.
Oven
In oven mode, you can select from the following types
of heating:
Setting the heating function and
temperature
1 Use the function selector to set the required
heating function, e.g. "Hot air".
The
H
symbol for "Hot air" and the default
temperature 180 °C appear in the display.
2 Set the temperature using the rotary selector.
Note: If required, you can now set the cooking
time for your dish and delay the cooking-time end
to a later time. Touch the
h
symbol; the
sequential operation menu is displayed. Use
C
to
select and set the
6
"Cooking time" function.
Use
C
to select and set the
5
"Cooking-time
end" function.
You can find more detailed information on this in
the
Sequential operation
section.
3 Press
I
to start.
The
“
heat-up symbol appears in the display (only
after the oven temperature has been set to 100 °C).
The bars continuously display the heating status.
When the set temperature has been reached, a signal
sounds and the
“
heat-up symbol goes out.
If the "Rapid heating" function is activated, the
’
symbol for "Rapid heating" appears.
Note: You can activate or deactivate a heat-up signal
in the basic settings. This signal sounds when the
required temperature is reached.
Type of heating Temperature Use
H
Hot air 40 °C Proving yeast dough,
defrosting cream cakes
100-250 °C Baking cakes, small
baked products and
pizza on the glass tray
R
Full surface
grill + hot air 100-250 °C Roasting pieces of
meat
Z
Full surface
grill + circu-
lated air 100-250 °C For bakes, toppings
and whole poultry