10
7/12 REV. 8/14
S/N: 1033 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
HEAD
Remove nose assembly from tool before attempting disassembly of head cylinder (745366).
Remove end cap (745816). Push against threaded end of piston (745310) to slide it out of head cylinder (745366). Be careful not to
damage threads or cause burrs on polished piston rod surface.
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
four socket-head cap screws (400061) uniformly to 40 inch lbs. to prevent leakage around the gasket.
403764 - O'RING
401080 - BACK-UP RING
204304 - SWIVEL ASSEMBLY
480125 - RETAINING NUT STOP
480101 - PINTAIL TUBE
A-261 - O'RING
401119 - BACK-UP RING
401119 - BACK-UP RING
405889 - O'RING
756120 - DEFLECTOR
480124 - NUT
753101 - NOSE FITTING
401092 - BACK-UP RING
745366 - HEAD CYLINDER
403815 - O'RING
745310 - PISTON
401105 - BACK-UP RING
745816 - END CAP
402482 - BUTTON HEAD SCREW (2)
S572 - STAT-O-SEAL (2)
A-820 - O'RING
403846 - O'RING
S1181 - BARBED FITTING
A-144 - HOSE CLAMP
204304 - SWIVEL ASSEMBLY (2)
(INCLUDES 401080 & 403764)
704311 - AIR LINE
A-1282 - HYDRAULIC HOSE (2)
A-144 - HOSE CLAMP
S1181 - BARBED FITTING
745303 - MANIFOLD - HANDLE
402482 - BUTT0N HEAD CAP SCREW
S572 - STAT-O-SEAL
704130 - AIR ACTUATOR ASSY
704312
ACTUATOR LEVER ASS'Y
400061 - SOCKET HEAD CAP SCREW
700326 - HANDLE-SPLIT
745124 - GASKET
S832 - O'RING
S572 - STAT-O-SEAL
402482
BUTT0N HEAD
CAP SCREW
745305 - GLAND
S829 - O'RING
403805 - O'RING
703561 - HOSE GUARD (NOT SHOWN)
A-663 - HANGER
