8
REV. 7/14
S/N: 1070 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
HEAD
WARNING:
DISPOSE OF HYDRAULIC OIL IN ACCORDANCE WITH ALL ENVIRONMENTAL LAWS AND REGULATIONS
APPLICABLE IN YOUR AREA.
Remove nose assembly from tool before attempting disassembly of head cylinder assembly (743116).
Remove end cap (743214). Push against threaded end of piston (743407) to slide it out of head cylinder ass’y (743116). Be careful not
to damage threads or cause burrs on polished piston (743407) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
four socket-head cap screws (400061 & 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
SEAL IN POLYSEAL
MUST FACE IN
THIS DIRECTION
743214 - END CAP
S829 - O'RING
400792 - O'RING
A-1135 - POLYSEAL
401089 - BACK-UP RING
743407 - PISTON
S834 - O'RING
S834 - O'RING
743116
HEAD CYLINDER ASSEMBLY
70856 - JAM NUT
703011 - TUBE
703013 - DRAWBOLT EXTENSION
703007 - SLEEVE EXTENSION
400792 - O'RING
703440 - GRIP
401816 - PLUG
S832 - O'RING
704129 - GASKET
744306
MANIFOLD-HEAD
ASSEMBLY
704130 - AIR
ACTUATOR
ASSEMBLY
A-336 HYDRAULIC
HOSE
724017 LEVER
ASSEMBLY
400066
SOCKET HEAD
CAP SCREW (2)
400061
SOCKET HEAD
CAP SCREW (2)
204304 - SWIVEL ASSEMBLY
(INCLUDES 401080 & 403764)
704305 - AIR LINE
A-144 - HOSE CLAMP (2)
S1181 - BARBED FITTING (2)
744303 - MANIFOLD-HANDLE
402482
BUTTON HEAD
CAP SCREW (2)
S572 - STAT-O-SEAL (2)
A-663 - HANGER
703563 - HOSE GUARD (NOT SHOWN)
S572- STAT-O-SEAL
402482 BUTTON
HEAD CAP SCREW
403764 - O'RING
401080 - BACK-UP RING
204304 - SWIVEL ASSEMBLY
