GADLEE GT85 Series, Руководство оператора

Страница: 33 / 60

ENGLISH
23
charger, the battery does
not provide the correct
voltage (about 2.14 V per
element without load) and
only one or a few elements
appear flat when tested
with the hydrometer For 6 or 12 V single block batteries,
replace the entire battery
The electrolyte in the
battery is turbid the battery has reached the end of
the charging/discharging cycles
declared by the manufacturer replace the battery
the battery has been charged with
too high a current replace the battery
the battery has been charged
beyond the maximum limit
recommended by the manufacturer replace the battery
10.2 Alarms displayed
Display value Description
GADLEE GREEN
GT85 VER:1.00
Software release
Volts: XX.X V
Hours:XXXX.XX H
Machine status
CHEMICAL DOSE
1:XXX
Chemical Dose dilution rate
SOLUTION TANK
EMPTY
No water in tank.
RECOVERY TANK
FULL
Dirty water tank full
BRUSH MOTOR
TEMPERATURE PAUSE
The machine has worked for too
long at a high pressure
BATTERY LOW
CHARGE BATTERY
The battery voltage is <22.0V
BATTERY FLAT
TRACTION ONLY
The battery voltage is <21.5V
BATTERY FLAT
ALL FUNCTION STOP
The battery voltage is <21.0V
BRUSHES WORN
CHECK BRUSHES
Check brushes status