GADLEE GT85 Series, Руководство оператора

Страница: 17 / 60

ENGLISH
7
Never use or suck up inflammable or explosive liquids (e.g. petrol, fuel oil, etc.),
inflammable gases, dry dust, acids and solvents (e.g. solvents for paints, acetone, etc.)
even if diluted. Never suck up any burning or white-hot objects.
Do not use the machine on slopes or ramps higher than 2%; in the event of light slopes do
not use it transversally, handle it with extreme care and do not reverse. When driving
along ramps or heavier slopes take great care to avoid overturning or uncontrolled
acceleration. Overcome ramps and/or steps exclusively with the brush head and
squeegee lifted.
Never park the machine on slopes .
The machine must never be left unmanned with the motors running; before abandoning
the machine, switch the motors off, ensure that it cannot move accidentally, engage the
parking brake and remove the key from the ignition.
When using the machine mind the presence of people particularly children in the
environment where you are working.
Do not use the machine to carry persons/things or to tow things. Do not drag the machine.
Never lay things on the machine for any reason.
Do not obstruct the air vents and heat dispersion openings.
Do not remove, modify or elude the safety devices.
Various and unpleasant experiences have shown that people wear or carry various
objects capable of causing serious accidents: before starting to work, remove trinkets,
watches, neckties or other such things.
Always use individual safety protections: apron or protective suit/overalls, non-slip water-
proof shoes, rubber gloves, protective goggles and caps, face mask to protect the
respiratory system.
Do not put the hands in between moving organs.
Do not use detergents different from those provided for, and stick to the instructions
indicated on the respective safety sheets. Keep detergents in a safe place, inaccessible to
children, and in case they come in contact with the eyes, wash them immediately with
plenty of water or, if swallowed, call for a doctor immediately.
Make sure that the plugs for the power supply of the models with cable or of the battery-
chargers are properly grounded and protected by magnetothermal switches and
differentials.
Make sure that the electric characteristics of the machine (voltage, frequency, absorbed
power) indicated on the identification plate are compliant with those of the power
distribution plant. The machine with cable is equipped with three lead wires and a three-
contact ground plug for the use of a proper grounding plug. The yellow and green wire of
the cable is the earth wire: never connect this wire to other wires that are not the plug
ground tap.
It is fundamental to observe the battery Manufacturer’s instructions and stick to the
Legislator’s provisions. Keep batteries always dry and clean to avoid surface leakage
currents. Keep batteries safe from impurities, for instance metal dust.
Do not lay tools on batteries: danger of short circuits and explosions.
Mind the use of battery acid: stick to the relative safety instructions.
When using the machine model with cable mind that you do not crush or tear the power
supply cable. Check this cable periodically to control if it is damaged; if this is so, the
machine cannot be used.
In presence of particularly high magnetic fields assess the possible effects on the control
electronics.
Never wash the machine with jets of water.
The recycled fluids contain detergents, disinfectants, water, organic and inorganic stuff
recycled during the work stages: they must be disposed of in compliance with the laws in
force.
In case of breakdown and/or bad operation of the machine, switch it off immediately
(unplugging it from the mains) and do not tamper with it. Contact a technical assistance
centre of the Manufacturer’s.