GADLEE GT85 Series, Руководство оператора

Страница: 22 / 60

ENGLISH
12
manual).
To install the connector proceed as follows:

Remove about 13 mm of sheath from the black and red cables of the battery-charger;

Insert the cables in the connector pins and push strongly with suitable pliers;

Insert the cables in the connector respecting the polarity (red cable +, black cable –).
5.6 Lifting and handling the machine
 IMPORTANT
All stages must be performed in an adequately lighted environment adopting all
necessary safety measures.
Always wear individual protections for the user’s safety.
To load the machine onto a means of transport, proceed as follows:

Empty the collection and solution tanks;

Remove the squeegee and brushes (or abrasive disks);

Remove the batteries;

Place the machine on the pallet and fix it with plastic straps or metal brackets;

Lift the pallet (with the machine) using a fork lift truck and load it onto the means of
transport;

Anchor the machine to the means of transport with cables connected to the pallet and
machine itself.
6.
PRACTICAL GUIDE FOR THE USER
6.1 Control devices - Description
With reference to fig. A, the machine has the follow controls and indicator lights:

Display (fig. A, ref. 6): displays alarms and menus. During normal operation, the hour
counter (giving the actual number of hours the machine has been operating) and
battery voltage are displayed.

Setting button (fig. A, ref. 5): when pressed, scrolls through the various parameters
which can be set on the machine software.

Emergency button with key (fig. A, ref. 1): acts as a safety device. enables and
disables the electrical power supply to all machine functions To stop the machine
press the button.

Speed potentiometer (fig. A, ref. 10): regulates the speed of the machine forwards
and backwards

Direction selector (fig. A, ref. 9): move this selector to set movement of the machine
to forwards or reverse

Main/Brush button (fig. A, ref. 8): enables and disables the electrical power supply to
all machine functions, also enables automatic brush connect function

Brush release button (fig. A, ref. 7): enables automatic brush release

Solution flow regulation button (fig. A, ref. 2): pressing these buttons regulates the
quantity of detergent delivered (displayed by LEDs).

EASE DOSE switch (optional) (fig. A, ref. 3): enables and disables chemical dose
function.

Brush head pressure variation buttons (fig. A, ref. 4): vary the pressure of the
brushes on the floor

Squeegee lever (fig. F, ref. 2): raises (if lowered) or lowers (if raised) the squeegee,
enables/disables the suction function

Brush/ Traction button (fig. B, ref. 7): the drive button moves the machine forwards