GAC MOTOR EMPOW, Руководство пользователя

Страница: 326 / 356

320
8. Accident handling
- Remove the tire valve cap.
- Screw the water hose connector onto the
tire valve.
- Open the trim cover of 12V power supply,
insert the power connector into the on-
board 12V power supply, and start the
vehicle.
- Press the power switch button so that
the sealer is injected into the tire. The air
pressure is relatively high and between 2.8
bar and 4 bar during sealer application.
After sealer application, the air pressure
will drop to about 0.7-1.4 bar. When the
air pressure reaches the standard value,
switch off the power supply and screw on
the valve cap.
- Disconnect the sealer tube, the inflator
tube and the plug in turn, and put them
back to the original position.
- Start the vehicle and drive 3~5 km at a
speed of 20~60 km/h.