GAC MOTOR EMPOW, Руководство пользователя, Страница: 250 / 356

244
5. Driving guide
IFC
An IFC is installed on the upper part of the
windshield glass to detect the surrounding
environment, which can identify pedestrians up
to 80m away from the vehicle when no obstacle
is present (in case that the environmental
factors such as lighting are ideal) with a height
not less than 0.8m. The IFC sensor must be
calibrated under the following conditions:
-
The windshield or the camera bracket has
been removed and replaced.
- The IFC sensor has been removed and
replaced.
NOTE
If the IFC fails, the systems such as ACC,
ICA, LDW, FCW and IHC will fail as well.
NOTE
● The calibration of the IFC sensor
r e q u i r e s t h e s p e c i a l t o o l s a n d
equipment. If the calibration of the IFC
sensor is required, please go to the
GAC Motor authorized shop for relevant
operation.
● W h e n t h e I F C s e n s o r i s f a i l e d ,
misadjusted or blocked, the normal use
of the ACC, FCM, LDW, ICA, IHB and
other functions may be affected.
CAUTION
● P o o r l i g h t i n g c o n d i t i o n s , n i g h t ,
backlight, heavy rain, mist, ice, snow or
sludge may affect the IFC, leading to
interruption/performance degradation
and even failure of FCM, ACC, ICA,
AEB, LKA and IHC. In this case, the
instrument cluster will display alarm
messages relevant to intelligent driving
assistance such as “The MRR is
blocked”, “The sight of IFC is blocked”,
“Please check the LKA”, “Please check
the ACC”, “Please check the FCM”, etc.