GABRIEL KERAMIK AB
27
1
2
3
4
44
45
46
Cassette assembly in round and rectangular tiled stoves
Install the last vemiculite plates on
the two tubes in the
cassette and push it as far back
as possible. This improves the
combustion and forces the flame
forward.
Cut the
sealing block
to shape,
use e.g a hack saw blade.
Ensure that it fits exactly
and
seals around the base block
walls
.
Make sure the sealing block is not
pushed to far in as it will restrict
the inlet convection air flow to the
cassette.
Press the fan carefully into the pre
cut hole in the sealing block.
Note!
The fan must be moun-
ted so that air is sucked into the
fan. The air flow passes through
channels in the cassette and exit
through the upper front edge.
Fan installation in round and rectangular stoves
Insert the steel plate vertically and
over the cassete. Turn the plate
horizontally and pull it back to be
in close contact with thefire box
block (7) and at the same time is
wedged into the space between
the cassette and the body, see
pictures 3 and 4.
