GABRIEL KERAMIK AB
24
80/125
80/100
35
37
36
Cassette assembly in round and rectangular tiled stoves
Outdoor inlet air
Mount the reduction flange to the flexible tube and
connect the flange and tube to inlet air through the
floor
Indoor inlet air
Mount the reduction flange to the flexible tube and
connect the flange and tube to inlet air through the
base.
Place the enclosed rockwool
sheet in the firebox. Cut out a
square hole – same size as the
hole in the fire box block.
Fit in the cassette so that the steel
flanges round the cassette are
inside the tiles and the brass frame
is in contact with the tiles.
Note! If the cassette does not fit
correctly at the bottom edge this
can be compensated by removing
some rockwool in the forward
edge. Alternatelive a thin layer
of mortal can be laid at the rear
edge
under
the rockwool plate.
Thereafter the cassette should rest
stable and even on the bottom. The
brass frame should at the same
time fit tightly against the tiles.
NOTE!
The cassette is installed in
the same way in round and
rectancular stoves.
