27
2.11 Dismantling and disposal
Dismantling
Danger!
Caution!
Observe the safety instructions!
For dismantling the appliance proceed as described under "Installation", however, in reverse order.
Settings are irrelevant.
Disposal
⇐
Note!
Motor components
•
Aluminium
•
Iron
•
Plastic
•
Copper
•
Zinc
Dispose of the parts in accordance with the local disposal regulations.
2.12 Warranty and customer service
Our "General Terms of Business" apply in principle.
The warranty complies with legal regulations and is valid in the country where the motor was
purchased.
The warranty covers material and manufacturing defects occurring under normal stress.
Warranty and liability claims in view of personal injury and damage to property are excluded, if the
latter have occurred as a result of
9
Inappropriate use of the motor
9
Improper installation, commissioning, operation, maintenance and repair of the motor
9
Operation of the motor with faulty, incorrectly fitted or non-functional safety and protection de-
vices
9
Failure to observe the instructions in the Installation and Operating Guide
9
Unauthorised structural modification of the motor
9
Catastrophic events due to penetration of foreign bodies and force majeure.
9
Wear
For possible warranty claims or the delivery of spare parts or accessories, please contact your re-
sponsible distribution company.
28
2.13 Connection diagram
Connection of KS30/40 Remote
The chain drive ELTRAL KS 30/40 REMOTE comes with a 2 mtr two-core supply cable which is to be
connected to a mains voltage of 230 V ~ 50 Hz.
The commands OPEN and CLOSE are given with the hand-held radio transmitter KS 30/40 (order no.
K-17439-00-0-0). Control via hard-wired switch is not possible.
The connection is to be carried out according to the following wiring diagrams.
