p.20
Using RAID Modes
The RAID Configuration Utility
The G-RAID with Thunderbolt RAID Configurator is used to change the RAID level of your
G-RAID with Thunderbolt. You can use any of the two Thunderbolt 2 ports or USB 3.0 port
in your G-RAID with Thunderbolt with the RAID Configurator application. To configure G-
RAID with Thunderbolt, it will need to be the only device connected to your computer.
The RAID Configurator utility is available for download from the G-Technology website at
www.g-technology.com/support
. There are both Mac and Windows versions of the utility.
Please download the right utility depending on the host operating system that you
are using.
Once you have downloaded the RAID Configurator, you should launch it directly from the
mounted disk image and complete the installation process.
Once installed, launch the RAID Configuration Utility and the tool shows the current status
and other details of the drive similar to the image below.
