G.T.Power A620, Руководство по эксплуатации

Страница: 16 / 29

- 13 -
The screen shows the present situation during charge process. To stop charging press Batt type/
Stop key once.
7.3 'FAST' charging Lithium battery
The charging current is getting smaller as the process goes to the near end term of Lithium battery chaging. To fi nish charging
process earlier, this program eliminate certain term of CV process. Actually, the charging current will goes to 1/5 from the initial value to
end the process while the normal chaging goes to 1/10 during CV term. The charging capacity may be a bit smaller than normal charging
but the process time will be reduced.
You can set up the charging current and the voltage of the battery pack being charged. As you
press
Start/ Enter
button the voltage confirma tion will be displayed. And then, if you con fi rm the
voltage and current, press Start/ Enter button again to start charging.
This shows the present state of 'FAST' charging. To stop charging arbitrary, press Batt type/Stop
key once.
7.4 'STORAGE' control Lithium battery
This is for charging or discharging Lithium battery not to be used for the time being. The program will determine to charge or
discharge the battery to the certain voltage depending on the voltage of the battery at its initial stage. They are different from the type of
the battery, 3.75V for Lilo, 3.85V for LiPo and 3.3V for LiFe per cell. If the voltage of battery at its initial stage is over the voltage level to
storage, the program will start to discharge.