Page 5
Telephone Call Alerts
The Door Contact Alarm can be programmed to send you a telephone call after each text
alarm has been sent.
You will receive approximately three ring tones. The unit will then hang up automatically.
This is to prevent call charges being incurred.
To text call alerts to ON please send the text message
#
CALL
=
ON
#
The unit will reply back with the message - “CALL ON”
To disarm call alerts please send the text message.
#
CALL
=
OFF
#
If the call function has been set to ON you will receive a text message and shortly after a
phone call.
How to use the 2G/3G Door Contact Alarm
Once you have positioned the door contact, installed the simcard and programmed the
numbers the system is ready to use.
The GSM Door Contact Alarm has two modes, alarm mode and auto mode.
Alarm mode:
you have to arm the alarm manually each time when required via a text
message command or via the keyfob provided.
Auto mode:
the alarm is always armed. You should choose which mode is more suitable
to your application.
These modes are selected by sending the following text messages
#
Mode
=
1
#
Auto Mode
#
Mode
=
2
#
Alarm Mode (default)
The default setting is alarm mode, to get an alarm notification when the beam is triggered,
you will need to arm the alarm first via text message or key fob
www.gsm-activate.co.uk
- 01273462380 - [email protected]
