Below is a notepad to help you remember the numbers that you have saved to your unit in
the event you need to modify or delete in the future.
#
1
=
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
#
#
2
=
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
#
#
3
=
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
#
How to programme the SMS text message
You can now change the alarm message from “input detected” to one of your own choice.
To change the message send the text command as follows
#
MESS
=
YOUR MESSAGE
#
The detector will reply with a text message - “MESSAGE STORED”
IMPORTANT - PLEASE READ
You can only use a maximum of 19 characters including spaces for your customised
message.
Page 4
How to Programme Mobile Numbers
After inserting the simcard into the GSM module, turn the unit on and wait until you see the
GREEN
LED is on. This indicates that the module has a signal and the unit is ready for use.
Please Note
-
To avoid confusion we have colour coded the hash (
#
) and the equals (
=
)
symbols. Furthermore, where it indicates a phone number this should be
your number or the numbers you wish the unit to contact.
Example: (
hash
) (1,2 or 3) (
equals
) (phone number) (
hash
)
To programme mobile numbers into the unit you will need to send them as a text to the unit
as follows:
#
1
=
07123456789
#
Then send this as a text to the unit for contact no: 1
#
2
=
07234567891
#
Then send this as a text to the unit for contact no: 2
#
3
=
07345678912
#
Then send this as a text to the unit for contact no: 3
If you wish to cancel a number, follow this example.
(
HASH
) (1,2 or 3) (
EQUALS
) (DELETE) (
HASH
)
#
1
=
DELETE
#
This will delete contact no: 1
IMPORTANT - PLEASE READ
Please only send one message at a time and wait for the GSM detector to send back the
text acknowledgement “NUMBER STORED” before you try to add the next number.
www.gsm-activate.co.uk
- 01273462380 - [email protected]
