Technical Documentation G.Mondini S.p.A. Tray Sealer TRAVE-350
8
By-pass belt
By-pass belt suitable for allowing un-sealed trays
to pass through the sealing station without being
heat sealed. The by-pass belt is positioned in the
place of the sealing tool where there are trays
which have to by-pass the sealing station.
Pre Cut Lid
A shuttle system allows the machine to pick pre cut
lids from the side magazine located on the side of
the tool.
This option includes:
Shuttle structure.
Vacuum generator.
Hoses and electro valves.
Tool with side magazine.
PLC software.
Printed Film Registration
A photo eye detects the marking log on the printed
film and stops it in the right position to have the
printing centred on the tray. An accurate film lay
out is provided for each tool to allow a proper film
printing.
