PAGE 1 OF 6
0621 IH-8013
H-8013
HANDHELD
INDUCTION SEALER
1-800-295-5510
uline.com
INSTRUCTIONS
1. Plug in and turn on using on/off switch on back
of unit. (See Figure 1)
2. Tightly screw on induction seal cap to jar and center
induction seal wand on top of cap. (See Figure 2)
NOTE: Compatible with 20-100 mm induction
seal caps.
3. While applying slight downward pressure, press
and release the red start button and remove the
wand when the timer reaches zero. Cap will now be
sealed. (See Figure 3)
NOTE: Allow cap to cool before handling.
NOTE: Arrows on the left adjust time +/– 1
second and arrows on the right /– 0.1
second. (See Figure 3)
NOTE: Timer can be set between 0.1 and 9.9
seconds. To ensure best seal, unit should be
tested to determine the best time setting for
customer's product.
Figure 1
Figure 2
Induction
Seal Cap
On/Off
Switch
Jar
Figure 3
S
S
V
Start
Button
Timer
Arrows
INCLUDED
Practice Seal
Practice Jar
and Cap
Replacement
Start Button
Replacement
Fuse
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
