G-Lab GSC-4, Руководство пользователя

Страница: 24 / 34

user manual GSC_4 23
4.2.1 MIDI OUT functions
It is possible to define up to a maximum of 10 midi devices.
Control change
Tap tempo
Midi device – to control any MIDI device it is required to assign the device in MIDI settings.
The controller enables to set the given settings:
- NAME – device name with (max 20 characters)
- MIDI CHANNEL NUMBER – the MIDI channel of controlled device (form 1 to 16 or INACTIVE when the
device is not defined)
- CONTROLLERS LIST – the list of CONTROL CHANGE commands to control the unit
- SEND CONTROL CHANGE FIRST – when programming PROGRAM CHANGE and CONTROL CHANGE com-
mands it is possible to send a Control change at first
- TAP TEMPO – tap tempo settings
The first step which enables the use of MIDI is done by activating ‘MIDI DEVICE’ and by selecting the MIDI
CHANNEL which corresponds to the MIDI CHANNEL of the receiving MIDI device. It is recommended to
name the device later in the PRESET/MFS programming. It will help to identify the given device. Defined
midi device field in the main display will change its grey color to red.
Control Change usually controls a single Function of the controlled MIDI device. Each function has its own
assigned CC number. It is possible to assign up to a maximum of 20 such functions for each midi device.
To set the controller list proceed as follows:
MENU -> MIDI DEVICES -> MIDI DEVICE NAME-> CONTROLLER LIS
T
Beside the controller’s number, it is possible to add the name of it. Names will show up in the basic
programming. The controllers number is set as follows:
basic programming -> MIDI DEVICE -> CTRL CHANGE VALUE. Controller will send maximal 20 CC com -
mands after recalling the PRESET or the MODIFIER.
Activating the TAP TEMPO Function for each MIDI DEVICE. There are two ways of sending tap tempo:
- TAP CTRL – Every press of the footswitch defined as a PRESET sends the Control Change command.
The CC command number is set globally for all midi devices as follows:
MENU -> TAP TEMPO -> TAP CTRL NUMBER
Then it is possible to activate the TAP TEMPO for the chosen
MIDI DEVICE: MENU -> MIDI DEVICES -> MIDI DEVICE name-> TAP TEMPO
To use this Function set the TAP CTRL mode. Tapping of the tempo will send alternating 0 and 127 values
of the CC number.
- TAP TEMPO NOTE – Every press of the defined footswitch as a PRESET sends the MIDI NOTE command.
The note number is set globally for all midi devices as follows:
MENU -> TAP TEMPO -> NOTE ON/OFF
Then it is possible to activate the TAP TEMPO for the chosen
MIDI DEVICE: MENU -> MIDI DEVICES -> MIDI DEVICE name-> TAP TEMPO
To use this Function set the AP TEMPO NOTE. Tapping of the tempo will send the note with the value 0.