G-Lab GSC-4, Руководство пользователя

Страница: 23 / 34

22 user manual GSC_4
4.1.2 Bank name
4.1.3 MFS name
4.1.4 LOOP section
4.1.5 SWITCH section
4.2 Settings programming
It is possible to change the bank name in each MFS belonging to the bank. To change the bank name
select the field of the bank name and press OK. Then proceed as described in chapter 2.5 for editing
with the on-screen keyboard.
It is possible to name every MFS function. To change the MFS name select the field of the MFS (preset) name
and press OK. Then proceed as it is described in the chapter 2.5 for edition with the onscreen keyboard.
For setting the given loops state. Available settings and modes of MFS where the LOOP section is active
are shown in the Table 1. on page No. 12.
For setting the given amp controlling outs. Available settings and modes of MFS where the SWITCH sec-
tion is active are shown in the Table 1. on page No. 12.
To enter the settings programming press the MENU keyboard button (the controller must be unlocked –
see chapter 4). In the chapter 2.2 it is described how to move in the MENU setting.
Warning! IF THE SETTINGS PROGRAMMING WAS ACTIVATED FROM THE MODIFIER THEN THE QUIT
WILL RECALL THE NEAREST PRESET.
PRESET
ON – the section’s field is set to on and causes the immediate reaction of hardware.
OFF - the section’s field is set to off and causes the immediate reaction of hardware.
PC - PROGRAM CHANGE sending.
CC - CONTROL CHANGE sending.
LOOP MODIFIER, SWITCH MODIFIER
ON – the section’s field is set to on. Using such modifier will turn on the selected fields.
OFF - the section’s field is set to off. Using such modifier will turn off the selected fields.
TOGGLE – the section’s field is set as a switcher to the opposite state. Using such a modifier will switch
selected fields to the opposite state.
INACTIVE - the section’s field is inactive. Using such setting will have no influence on the selected fields.
To check the ON, OF, or TOGGLE programming hardware response it is required to quit the edition and
recall the preset. Then recall the programmed MFS footswitch.
MIDI MODIFIER
PC - PROGRAM CHANGE sending.
CC - CONTROL CHANGE sending.
Warning! CHANGING TYPE OF THE MFS FOOTSWITCH WILL CLEAR ALL PREVIOUSLY PROGRAMMED
FIELD SETTINGS.