G-Lab GSC-4, Руководство пользователя

Страница: 22 / 34

user manual GSC_4 21
Figure 4.1.3 MIDI section
4.1.1 MFS footswitch type.
Table 1. Available controller’s sections (fields) for particular MFS foot switch modes.
– Fields “1” and “4” indicate the defined MIDI devices which are ready for programming midi
commands (no midi commands programmed for these devices).
– Fields “2” and “3” indicate the defined MIDI devices with already programmed midi commands.
– Fields “5”, “6”, “7”, “8”, “9”, “10” indicate there are no defined MIDI devices
Every MFS footswitch can work in one of four modes mentioned below:
PRESET, LOOP MODFIER, SWITCH MODIFIER, MIDI MODIFIER. The table below indicates which fields are
active for which MFS mode.
PRESET
ON – the section’s field is set to on and causes the immediate reaction of hardware.
OFF - the section’s field is set to off and causes the immediate reaction of hardware.
PC - PROGRAM CHANGE sending.
CC - CONTROL CHANGE sending.
LOOP MODIFIER, SWITCH MODIFIER
ON – the section’s field is set to on. Using such modifier will turn on the selected fields.
OFF - the section’s field is set to off. Using such modifier will turn off the selected fields.
TOGGLE – the section’s field is set as a switcher to the opposite state. Using such a modifier will switch
selected fields to the opposite state.
MFS footswitch mode
Controller’s field (section)
LOOP SWITCH MIDI
PRESET
(red)
ON ON PC
OFF OFF CC
LOOP MODFIER
(blue)
ON
ON
TOGGLE
INACTIVE
SWITCH MODIFIER
(green)
ON
- OFF
TOGGLE
INACTIVE
MIDI MODIFIER
(yellow)
PC
- - CC