G-Lab GSC-4, Руководство пользователя

Страница: 17 / 34

16 user manual GSC_4
3.1 Switching on the controller
Switching on the GSC-4 activates the previously recalled PRESET (recalled before turning off). When the
controller has been turned off after recalling a different function than PRESET then it will activate the
lowest PRESET number available.
3.2 Display
Figure 3.2.1 Bank and preset are active
Figure 3.2.2 Bank is active, preset is not active
Figure 3.2.3 Bank and preset are not active
Above fields of the display are subject to the following mechanisms:
- BANK color back round is always the same.
- MFS number, function and name are changing color back round depending on MFS function
(see figures 2.1.1, 2.1.2, 2.1.3, 2.1.4).
- Fields and characters displayed in reverse, refers to the active bank/preset.
Figure 3.2.4 LOOP section
LOOP section fields are subject to the following mechanisms:
- The field’s back round color depends on the last used MFS footswitch.
– Field with back round color (“B”, “4”) indicates that the given loop is ON.
– Empty with back round color (“1”, “2”, “6”), indicates that the given loop is OFF.
– Empty with gray color back round (“5”) indicates that the given loop is used for the wah/whammy
pad (see chapter 4.2.3).