G-Lab Dual Vintage Overdrive, Руководство пользователя

Страница: 9 / 16

7
Parallel connection to the amp
The connection with the amp is done by two circuits.
PRE OUT output signal is connected to the amp guitar input.
Output (OUT) signal from DVO should be connected to the amp effects
loop using Switching cable for DVO (product code 00804, ordered separately).
REMARK: In case of connecting Switching cable for DVO , it is required to
connect PRE OUT output to the amp INPUT by the Jack/Jack cable (this cable
assures proper grounding). DVO should be switched to No. 4 mode of working
and for work with Switching cable for DVO (No.3 DIP switch position should be
ON).
DIP switch
position
Connection to an amp
Without „ Switching Cable
for DVO”
Using „ Switching Cable for
DVO”
In this case switching on the first CH1 channel or the second CH2 one will
affect in connecting DVO output directly to the RETURN input of the effects
loop (directly to the power amp skipping pre-amp section). Independence of
amp tones from the overdriven DVO channels is the advantage of such
solution. Tones from the DVO are independent from amp tone settings (except
of PRESENCE control if available).