G-Lab Dual Vintage Overdrive, Руководство пользователя, Страница: 8 / 16

6
Connecting to a guitar amp
The way of connecting DVO to a guitar amp, an amp type and an amp
controls adjustment affect to a high degree of the final tone effect.
Connecting to the amp guitar input
In such case it is recommended to switch on clean amp channel and to set
flat tone characteristics.
This way of DVO connecting makes that overdriven tone is highly
dependent on an amp tone setting.
Connecting to the amp effects loop input
When the amp is equipped with the serial effect loop (LOOP) , it is
recommended to connect OUT output to RETURN effects loop input. In such
case the tone is depending only on amp PRESENCE control if available.
Correction of the tone can be done post overdriving by +3dB BASS and
TREBLE boost switches. If such connected DVO allows to get a good
overdriven ton
, you should use parallel connection to the pre-amp (see below).