G-Lab Dual Vintage Overdrive, Руководство пользователя

Страница: 6 / 16

4
Power supply
DVO should be supplied from external regulated 9V (from 8.7V up to
9.6V) DC power supply, with 80 mA output or more. Before connecting
please check if the connector’s polarisation is proper. DVO is protected
against opposite polarity and overvoltage.
Mode of working selection
In the below table are given footswitches functions in four modes of
working. Mode of working selection is done by No.1 and No.2 DIP switches
located on the left-hand side of the casing.
Mode
DIP switch
position
Left switch
Central
switch
Right switch
1 CH 1* CH 2*
SOLO (CH 2 with full
volume)
2 CH 1* CH 2*
SOLO (active channel
volume change from lowered
to full - or reverse)
3
CLEAN
tone
CH 1
with full
volume
CH 2
with full volume
4
BYPASS
mode
CH 1
with full
volume
CH 2
with full volume
* - with volume -3 dB or -5 dB set by SOLO switch
DIP switch lower position is ON.
Operations of particular modes of working are graphically presented in the
next page table.