FYTTER RACER RC MSR, Руководство пользователя

Страница: 33 / 34

FYTTER | WWW.FYTTER.COM PAG- 32
(ENGLISH) COMMON ERRORS:
Problem Solution
The upright bike
wobbles when in
use.
Turn the adjustable leveler on the rear stabilizer as needed to level the upright bike.
There is no
display on the
computer
console. 1.
Remove the computer console and verify the wires that come from the computer console are
properly connected to the wires that come from the handlebar post.
2.
Check if the batteries are correctly positioned and battery springs are in proper contact with
batteries.
3.
The batteries in the computer console may be dead. Change to new batteries.
There is no heart
rate reading or
heart rate reading
or is erratic /
inconsistent.
1. Make sure that the wire connections for the hand pulse sensors are secure.
2.
To ensure the pulse readout is more precise, please always hold on to the handlebar grip sensors
with two hands instead of just with one hand only when you try to test your heart rate figures.
3.
Gripping the hand pulse sensors too tight. Try to maintain moderate pressure while holding onto
the hand pulse sensors.
The upright bike
makes a
squeaking noise
when in use.
The bolts may be loose on the upright bike, please inspect the bolts and tighten the loose bolts.
ENG- A correct lubrication of the product with silicon oil or teflon is REALLY IMPORTANT. This lubrication MUST BE
PERFORMED REGULARLY DEPENDING ON EACH PERSON, EVEN BEFORE ITS FIRST USE.
ESP- Es MUY IMPORTANTE que realice una LUBRICACIÓN adecuada del producto con aceite de silicona o de teflón.
ESTÁ LUBRICACIÓN DEBE REALIZARSE DE MANERA PERIÓDICA EN FUNCIÓN DEL USO DE CADA PERSONA, INCLUSO