Digital Audio Output Setting
Connect coaxial or optical output of the player to the corresponding inputs of amplifier.
When a disc is in play or stop mode, press the
button on the remote
control to open the DVD Menu setup. Use direction buttons to move to audio setup
page; Move the cursor toSPDIF setup, select the digital output and set SPDIF/RAW
or SPDIF/PCM. Then press the
button to save the selected value. To
exit the setup menu, press the
button again.
SETUP
PLAY/ENTER
SETUP
The Setting of 5.1 Channel Output
Connect the 5.1 channel output to the 5.1 channel input terminal of the amplifier.
Press the
button to enter the DVD menu setup; open the Audio setup page;
select speaker setup and set the Downmix to 5.1 CH.
SETUP
CONNECT TO THE AMPLIFIER
MENU SETUP
3) Super Bass
ON: set the super bass on, and adjust the super bass effect.
OFF: set the super bass off.
4) Treble Boost
ON: set the treble boost on and adjust the treble effect.
OFF: set the super treble boost off.
4. Equalizer
1) EQ Type
This option is used to select the different balanced effect, such as None, Rock,
Pop, Live, Dance, Techno, Classic, Soft.
2) Bass Boost
It use to adjust the sound effect of Bass boost to ON or OFF.
3. Channel Delay
To set the delay effect of channels.
5. 3D Processing
PRO LOGIC II ( On, Off, Auto)
In this option, when ON is selected, the sound of 2CH will be dummy in 5CH, and
transmit through 5CH. If the TITLE does not support this function, the effect will
be worse by selecting ON. So in this case, you are suggested to select AUTO.
Reverb Mode
This option is use to select the reverb mode from: Concert, Living room, Hall,
Bathroom, Cave, Arena, Church.
1) Mode (Music, Movie, Pro Logic, Auto)
In Music mode, all the voice of channels can reach at the same time, without delay;
In Movie mode, the surround channel is added 10ms delay; PRO LOGIC mode is
the emulation of PRO LOGIC I; In Auto mode, the player choose the mode
according to the disc automatically.
2) Panorama
When ON option is chosen, the voice of front stereo spread to the two sides, and
make a better enveloped felling.
3) Dimension: This function is used to adjust the front and rear sound fields, which
is similar to the balance control between front and rear speakers. There are seven
options for selecting.
4) Centre width: To adjust the centre signal to transmit left and right channels, and
emit out from the three front speakers with different degrees.
Note: When PRO LOGIC II is set to be OFF, the above four options are unavailable.
Surround L
Surround R
5.1CH Audio output
Subwoofer
Centre speaker
Left channel
Right cha nnel
(Select one of the digital
audio connecting ways)
Содержание DVD-2090
Страница 1: ...USER MANUAL DVD PLAYER DVD 2090...
