CONNECT TO THE TV-SET
1. If your TV-set has AV input, use the AV cable to connect the player to the TV-set.
Afterwards make sure the connection is right; by selecting AV status for your TV-set.
2. If your TV-set has S-video input, use S-video cable to connect the player to the TV-set.
This type of connection provides the best quality of picture.
3. If your TV-set has Pb/Cb, Y, Pr/Cr input, use six headed jack cable to connect the
player to the TV-set. This type of connection makes the picture more natural.
4. This unit has an HDMI output interface, which can directly be connected with TV-set.
5. This unit has a D-connecter interface for progressive scanning, which can directly
be connected with TV-set.
NOTES:
1. Before connecting the player to the TV-set; turn off and unplug the both units.
2. When a disc is being played, we recommend changing the settings of the player in
order to make it compatible with the TV-set .
3. You can connect the player to the TV-set in different ways. Choose only one of them
as multiple connections negatively influence the source and picture quality.
4. Do not turn ON/OFF the player repeatedly; allow for intervals of minimum 3
seconds in between.
5. Do not use digital coaxial or optical output of the player and analogue output at the
same time.
MENU SETUP
System Setup Page
Go To System Setup Page
--System Setup Page--
Angle Mark
On
Close Caption
On
Screen Saver
Off
Memory
Off
S/W Version
Default
DVD
VIDEO AUDIO SYSTEM PASSWORD
1. Angle Mark
When the disc has multi-angle pictures, setting the Angle Mark displays a multi-angle
mark on the screen. This option has two settings :
ON: Display multi-angle mark
OFF: Multi-angle mark is not displayed
2. Close Caption
When playing a DVD, set this option OFF to close caption, choose the ON option
to open the caption.
4. Memory
3. Screen Saver
To set screen saver on or off.
(This setup page only be available when the player in No Disc or Eject status.)
When the option is set to ON, the system remembers the played discs contents.
The disc content is not remembered when the OFF option is selected.
Note: It is only available for VCD/DVD disc.
6. Default
While in EJECT or NO DISC status, this option is chosen to reset the DVD player`s
original setup.
5. S/W Version (Software Version)
This option is used to display the model of this unit.
HDMI
S-video
Pr/Cr
Pb/Cb
Y
Video input
4
Audio R
Audio L
5
D-connecter
Содержание DVD-2090
Страница 1: ...USER MANUAL DVD PLAYER DVD 2090...
