Operators and Technicians Manual
2011 – 2014 FutureLogic, Incorporated. All Rights Reserved.
MNL Page 26 04/10/2014
MNL-000067 REV.X03
6.
(Recommended for most firmware versions) Select
Erase User Settings
.
This will reset the previous communication parameters (baud rate and handshaking) to the new
firmware default settings.
7.
Click
Full Upgrade
.
The upgrade cycle may repeat depending on the firmware and if you select
Erase User Settings
.
The green status icon on the top right of the screen will flash continuously until the process is complete.
Figure 8-8
FLDFU Main Window – Progress Area
8.
Wait for the “Printer Successfully Updated” message to display in the status area.
WARNING!
Do not stop the process or unplug the printer.
Figure 8-9
FLDFU Main Window – Status Area
