Operators and Technicians Manual
2011 – 2014 FutureLogic, Incorporated. All Rights Reserved.
MNL Page 7 04/10/2014
MNL-000067 REV.X03
4
Maintenance & Service
Introduction
This chapter provides instructions on printer maintenance and service outside of the game.
Printer Sensors
The printer has five sensors that work with the game firmware to provide reliable trouble-free operation.
Figure 4-1
Printer Sensors
Num
Sensor
Description
1
Printer Tray
(Drawer Open)
This plastic tab and sensor detects if the printer is pulled forward.
2
Lid Open
(Printer Open)
This plastic tab and sensor detects if the Printer Lid is open.
3
Ticket Taken
(Paper Taken)
This sensor detects tickets being presented and if the ticket is taken. It is
located in front of the feed rollers, just behind the Ticket Out Slot.
4
Ticket Low
(Paper Low)
This sensor, located under the Ticket Tray, activates when the last ticket
is taken from the Ticket Tray. This sensor determines when the paper
stack has approximately 1 or 2 tickets remaining. A Paper Low condition
automatically resets once a stack with a greater height is loaded. Paper
low sensing occurs when the system is idle and takes a few seconds to
detect the new paper level.
5
Paper Out /
Index Mark
This sensor is located within the Print Head. It detects when a ticket is
present. It also detects the index top-of-form (TOF) mark.
